| Accessories for SPECTRAL MM 102 |
| GR 1835 |
Milling head 63 mm for 5 cutting tips |
| GR 1836 |
Milling head 80 mm for 6 cutting tips |
| GR 1838 |
Milling head 63 mm. for iron & steel samples, 45- 64 HRC (max. 50 mm sample) |
| GR 1839 |
Milling head 80 mm. for iron & steel samples, 45- 64 HRC (max. 67 mm sample) |
| GR 1810 |
Manual measuring tool for cutter positioning |
| GR 1911 |
Automatic Sample Height Measurement System for full cyclic operation. |
| |
(To be ordered simultaneously together with the machine order) |
| GR 1841 |
Automation Software for full cyclic operation. |
| |
(To be ordered simultaneously together with GR 1840) |
| GR 1801 |
Mechanical clamping device for samples up to 60 mm. |
| GR 1948 |
Universal Jaws for Mechanical Clamping Device (GR 1801) |
| GR 1949 |
Jaws for Thin Specimens for Mechanical Clamping Device (GR 1801) |
| GR 1943 |
Mechanical 3-jaw chuck |
| GR 1913 |
Pneumatic clamping device |
| |
(To be ordered simultaneously together with the machine order) |
| GR 1946 |
Universal Jaws for Pneumatic Clamping Device (GR 1913) |
| GR 1947 |
Jaws for Thin Specimens for Pneumatic Clamping Device (GR 1913) |
| YM 7550-00 |
Soft Jaws for Pneumatic Clamping Device (GR 1819) |
| GR 1816 |
T-slotted table |
| GR 1909 |
Air cooling system for Spectral MM 102 |
| |
(To be ordered simultaneously together with the machine order) |
| GR 1907 |
Floor Cabinet for SPECTRAL PG 52/MM 102/AG 102 |
| GR 1908 |
Mobile Chip Container for Spectral MM 102 |
| |
(Only used with GR 1907 Floor Cabinet) |
| |
| Installation, Operator Training and Limited Service Training |
| HIZ 014 |
"Installation, Operator Training and Limited Service Training" at customer site |
| |
by Metkon Service Engineer for products Spectral MM 102 / AG 102. |
| |
(Travel and living expenses are to be charged at actual cost additionally) |
| |
|
| Spare Part Kit for SPECTRAL MM 102 |
| GR 1928 |
Recommended Set of Spare Parts, SPC MM 102 |
