| Cooling Systems for SERVOCUT 302 |
| GR 1675 |
Recirculation Cooling Tank, 80 lt, for SERVOCUT 302/FORCIPLAN 102 |
| YM 8813 |
Fine filter sheets for recirculation cooling tank (GR 0018/0019/1675/1945), 10 pcs |
| GR 1559 |
Coolant level sensor for recirculation cooling tank |
| |
Informs operator when coolant level is insufficient. (for MA and AA models) |
| GR 1540 |
Magnetic collector rod for recirculation cooling tank |
| GR 1561 |
BANDCOOL Band Filter Unit for SERVOCUT 502/402/302 |
| |
Band filter conveyor for the automatic collection and disposal |
| |
of swarfs, with capacity of 115 lt, with fluid level indicator, |
| |
complete system on wheels, with connection kit. |
| |
400V, 3-phase, 50 Hz |
| YM 8878 |
Filter roll for BANDCOOL, 50 m, SERVOCUT 302/402/502 |
| |
|
| Accessories for SERVOCUT 302 |
| GR 1681 |
Cabinet for floor model - SERVOCUT 302/GEOCUT 302 |
| GR 1682 |
FUMEFILTER Centrifugal Separator for SERVOCUT 302/402/GEOCUT 302 |
| |
Removes coolant mist for better illumination and viewing |
| |
(To be ordered simultaneously together with the machine order) |
| YM 8833 |
Spare Filter Kit for FUMEFILTER (GR 1682) |
| GR 0105 |
Laser alignment unit for SERVOCUT 302/GEOCUT 302 |
| |
(To be ordered simultaneously together with the machine order) |
| GR 1680 |
Manual/Auto Table drive system with electromagnetic clutch(y-axis) |
| |
(To be ordered simultaneously together with the machine order) |
| GR 0991-01 |
Flange Set with larger diameter, Ø100 mm |
| GR 0998 |
Extension Box for cutting long specimens from the left hand side opening, |
| |
50 cm length, for SERVOCUT 302 |
| |
|
| Clamping Devices for SERVOCUT 302 |
| GR 0170 |
Quick Acting Clamping Vise Assembly, Left, for SERVOCUT 302 (Stainless Steel) |
| GR 0172 |
Quick Acting Clamping Vise Assembly, Right, for SERVOCUT 302 (Stainless Steel) |
| GR 0151 |
Compact Vise Assembly, Spring Loaded, for METACUT 302/SERVOCUT 302 (Stainless Steel) |
| 15 01 |
MBU 1011 Vertical Clamping Device with clamping shoe, clamping height up to 90 mm. |
| 15 03 |
MK 10 21 Height Block, 60 mm |
| GR 0453 |
Fastener vise for longitudinal sectioning of screws, fasteners tubes, etc. from 12 to 45 mm in length |
| GR 0310 |
Fastener vise for longitudinal sectioning of screws, ball joint, tubes, etc. from 60 to 100 mm in length |
| GR 0612 |
Angular Precision Clamping Device in 3-Axis Direction |
| 15 00 |
V-Block for holding parts above table slots |
| GR 0615 |
Adjustable V-Support, Small (Height Range: 57-67 mm) |
| GR 0616 |
Adjustable V-Support, Medium (Height Range: 65-85 mm) |
| |
|
| Spare Part Kit for SERVOCUT 302 |
| GR 1963 |
Recommended Set of Spare Parts, SERVOCUT 302 |
| |
|
